What should I do if I don't have network connection after arriving at the destination?
iOS:
Part 1: Check your settings
Make sure you’ve done all of the following upon arrival:
- Turn on eSIM & Data Roaming: Go to your SIM list, turn on this eSIM, and enable Data Roaming.
- Tap Cellular Data (or Mobile Data) and select your Klook eSIM.
- Turn off Data Switching: Turn off Allow Cellular Data/Mobile Data Switching to prevent charges on your primary SIM.
Part 2: Try troubleshooting
- Option 1: Refresh network connection
Turn on Airplane Mode for 10 seconds and then turn it off. Alternatively, restart your phone. After that, try to reconnect to the local network.
- Option 2: Stuck on 3G or "E"? Check for old profiles
Go to Settings > General > VPN & Device Management. If you see profiles from old carriers or other eSIMs, delete them and restart your phone.
Note: Only remove profiles associated with unused carrier/eSIMs. If you are unsure what a profile is for (e.g., company VPNs), contact customer support before deleting it.
- Option 3: Try switching carrier
▶ Go to Settings > Cellular (or Mobile Service or Mobile)
▶ Under the SIMs section, select your installed eSIM
▶ Tap Network Selection
▶ Turn off Automatic
▶ Wait about 30 seconds for the system to search and display available network operators
▶ Manually select the specified network operator's network name to attempt a connection
Note: You can find the telecom carriers supported by your eSIM in the "About your eSIM" section of the eSIM booking page on the Klook app.
Android:
Part 1: Check your settings
Please ensure these settings are configured upon arrival:
- Turn on eSIM & set as preferred data SIM:
Go to Settings > Network & internet / Connections > SIMs / SIM manager. Turn on your Klook eSIM named "Travel - Destination name" (e.g., Travel - SGP, Travel - JPN, or Travel - Asia) and select it for Mobile data.
- Turn on Data Roaming:
Go to SIMs / Mobile networks and turn on Roaming / Data roaming for this eSIM.
Part 2: Try troubleshooting
Option 1: Refresh the network connection
- Turn on Airplane Mode for 10 seconds and then turn it off. Alternatively, restart your phone. After that, try to reconnect to the local network.
Option 2: Verify or manually add the APN
- Go to Access Point Names / APN under your SIM / Mobile network settings, or search “APN” in your phone settings.
- Check if the active APN matches your booking details.
- If no APN is available or it doesn’t match, tap + / Add / More options (three dots) on the top right. Add & save the correct APN, and then select it. After that, restart your phone.
Note: The APN must match your booking details (including capitalization and spacing). Even a single-character difference will prevent connection.
- Option 3: Try switching carrier
Refer to the Pixel phone example:
▶ Go to Settings > Connections or Network & Internet > SIMs
▶ Select your active eSIM
▶ Scroll down to the Network section and turn off Automatically select network
▶ Wait about 30 seconds for the system to search and load the list of available networks
▶ Manually choose the specified available network's network name
▶ After selecting, try connecting to the network
If the issue persists, go to the Help Center and reach out to customer support via live chat.
Was this information helpful?
Other FAQs in "eSIM"
- What devices support eSIM?
- [In-app activation] How can I activate the eSIM on iOS devices?
- [QR code activation] How can I activate the eSIM or share the eSIM with a QR code?
- [In-app activation] How can I activate the eSIM on Android devices?
- Can I scan one QR code with multiple devices?
- Should I turn on data roaming when I'm using the eSIM?
- An error occurred while I was installing the eSIM. What should I do?